And it's as simple as this: Prime the decorative panel in white and let it dry. Paint the inside of the clay pots with Gold leaf priming milk , wait about 20 minutes, then apply Leaf metal and press it on with a brush. Brush off any excess material, where the glue is, the metal will stick. Collect the excess metal, you can use it again
As lanterns you can use Terracotta-pots, about 10.5 cm high. Carefully break in a large part of the Terracotta-wall and treat the sharp edges with Sandpaper.
Prime the lanterns on the outside in a different colour each time and let them dry. Stamp curlicues on the wooden board and on the pots. Accentuate them by accentuating the pots with white paint squiggles. Drag along the edges with the Ink Pads . When everything is dry, fix the Leaf metal through the overpaint. When this lacquer is also dried, screw the lanterns to the decorative shelf. Take care not to tighten the screws too much, otherwise tension cracks may occur. Cover the screw heads with buttons, which you simply stick on with hot glue. Insert the tea light glasses and hang up your new Wind light .
