www.vbs-hobby.com 
Exclusive offersHygge lamp design with fabric
Instructions No. 1653 Instructions No. 1653 Difficulty: Beginner Working time: 1 hour
Cozy light belongs in any case to the Hygge-feeling to that. Conjure up a great feel-good lighting for your home with just a few simple steps.
Lamp foil is a special semi-transparent film, adhesive on one side, through which the light of a light bulb or in this case a LED light chain shines warm white. To reproduce this Lanterns , cut the Lamp foil to 37 cm width x 15 cm, 20 cm and 25 cm height. Then cut the fabrics to: 35 cm width x 15 cm, 20 cm and 25 cm height. Now remove the foil from the lantern foils and stick the cut fabrics on. With a hole punch, punch 3 holes at the wide sides of Lamp foil at the same intervals. This is where foil plugs are laterused to seal the Lamp foil .
The outer sides of the lantern covers and bases are covered with double-sided Adhesive tape. Now remove the protective strips from double-sided Adhesive tape and stick the foils covered with fabric to the lantern bases and lids. Glue the ends of the foil together so that the holes are on top of each other. The foil plugs are now pressed into the pre-punched holes to prevent the foil from opening later.
In order to hang up the Lanterns , small holes are made in the lantern covers from above. You can use the pointed ends of the lantern brackets for this. Push the lantern brackets through and bend the ends into small loops with pliers. Tip: You can also simply place Lanterns on the ground. Finally, place a LED light chain into the Lanterns at only .
