www.vbs-hobby.com 
Exclusive offersIlluminated Wire Easter Egg
Anleitung No. 1555 Anleitung No. 1555 Difficulty: Beginner Working time: 30 Minutes
The decorative wire egg is a great eye-catcher in the Easter season. With only few handles this trendy table decoration can be quickly recreated.
It's that simple:
Cut a piece of wire mesh and form it into a wire egg
To do this, first glue together a 30 cm Polystyrene egg. The wire netting is rolled out slightly and loosely laid around the Polystyrene-egg to form a wire egg. Use the pliers to bend the wire ends together - not too tight, so that the Polystyrene-egg can still be removed from the wire netting. Cut off the protruding wire at the ends. Starting at the top end of the egg, the ends of the wire are woven together and the Polystyrene-egg can be removed through the opening. This can then be closed. Now pull only still two fairy lights through the wire
The wooden tray is now fixed with VBS Chalky Color painted in the colour antique white. Then a layer of Chalky Wax is applied to some parts of the tray (edges). After it has dried, simply apply a little bit of wax with a sponge VBS Chalky Color in Old Pink wiped over the surfaces. After this second layer of paint has dried, the areas previously coated with wax are carefully treated with Sandpaper until the typical Chalky look is achieved.
To do this, first glue together a 30 cm Polystyrene egg. The wire netting is rolled out slightly and loosely laid around the Polystyrene-egg to form a wire egg. Use the pliers to bend the wire ends together - not too tight, so that the Polystyrene-egg can still be removed from the wire netting. Cut off the protruding wire at the ends. Starting at the top end of the egg, the ends of the wire are woven together and the Polystyrene-egg can be removed through the opening. This can then be closed. Now pull only still two fairy lights through the wire
The wooden tray is now fixed with VBS Chalky Color painted in the colour antique white. Then a layer of Chalky Wax is applied to some parts of the tray (edges). After it has dried, simply apply a little bit of wax with a sponge VBS Chalky Color in Old Pink wiped over the surfaces. After this second layer of paint has dried, the areas previously coated with wax are carefully treated with Sandpaper until the typical Chalky look is achieved.
Easter decoration
self-made
The tray will now be decorated with Willow . The wire egg is placed in this "Easter nest". Moss, tulips, hydrangea flowers and pearl hyacinths complete the Floristry. The individual decorative parts of the arrangement should be fixed with hot glue
The wire egg with the fairy lights is decorated with a thick jute ribbon and finally, small delicate butterflies are glued onto the Easter decoration as desired - ready is your new Easter favourite decoration.
The wire egg with the fairy lights is decorated with a thick jute ribbon and finally, small delicate butterflies are glued onto the Easter decoration as desired - ready is your new Easter favourite decoration.
