This is how you design the artwork:
Work in a protected workplace with a handicraft mat, to avoid contamination.
First, prepare the casting compound by mixing Raysin and water to a creamy consistency. Follow the instructions on the pack carefully! For the best consistency, mix 280 ml of water with 1 kg of Raysin powder. This mixing ratio corresponds to 1 part water to 3.5 parts powder and produces about 650 ml casting compound. Stir the mixture thoroughly until there are no more lumps.
Then carefully pour the finished casting compound into your chosen molds. To avoid air bubbles, tap the filled molds gently on the surface several times. This will cause the trapped air bubbles to rise to the surface and burst, giving you an even result. After about one hour you will have a sufficiently hardened mass so that you can carefully remove the figures from the molds. Then leave the castings to dry at room temperature further so that they harden completely. For a smooth finish, sand the edges with fine sandpaper sandpaper. Once you have removed all the castings, it is important to clean the molds thoroughly. This will ensure that you can continue to use them for future projects.
Now the creative part begins: paint the gnomes with acrylic paints according to your ideas to give them personality and character. To embellish your arrangement further , decorate the fir trees and elves in a plate with decorative snow and glitter. This will give you glittering, wintry accents. For the crowning touch, add extra charm to your decorative ensemble with bows made from satin ribbon at the top of the fir trees. For the bow, glue two rings of different diameters on top of each other and secure them with a piece in the middle.
Visit our online store now to discover all the materials you need for your creative project and order them directly. Let your imagination run wild and design your individual decorative highlights today!
