Angel Lumiel
Instructions No. 1502You can easily recreate this bright winter decoration . The angels belong in every winter and Christmas decoration. They are a great eye-catcher in the home and also cut a fine figure as lucky and guardian angels.
Whitee Christmas angel
Next, stick an equally long strip of double-sided Adhesive tape. to each straight side of the cut-out star foil. Please note that the smooth side of the foil must face inwards to achieve the 3D star effect. Remove the protective strip of the adhesive tape, turn the star foil into a cone and stick the straight sides together to form a cone. Repeat this procedure for the second star foil section.
Now it is already the turn of the angels ' heads. First cut a strand of the Chenille wire each in two halves of equal length. Twist the ends of the chenille wire pieces together over a length of about 5 - 6 cm. The resulting ring at the upper end is later bent into a halo .
Bright dress & featherlight Angel wings
Do the same with the second strand Chenille wire. If the head is sitting on the correct Position, ..we'll get the wings . You have already cut these out of Foam sheets before. Now remove the protective foil from the self-adhesive Foam sheets and start to stick the Feathers to the Foam sheets as desired. The feather effect is most beautiful if you put the keels of the Feathers center on the back piece of the foam rubber. Then glue the Foam sheets to the angel body with a few drops of hot glue.
Please repeat the corresponding steps for your second winter angel. Now you still have to align the heads of the angels at only and bend the halos to the right shape. Ready is your heavenly shining winter angel!