www.vbs-hobby.com 
Exclusive offersCasting Easter Memo Holders & Decorative Figurines
Instructions No. 2171 Instructions No. 2171 Difficulty: Beginner Working time: 1 hour
Our beautiful decorations are pretty little animals, some of which can be used as memo holders. We have cast them in concrete as well as in Keraflott. Both casting materials produce beautiful results. The little animals with holder function can also be used as place cards to show your guests where to sit.
This is how the animals are made:
Mix the casting slip with water according to the instructions on the pack to a creamy consistency and pour into the desired moulds. Tip: The Keraflott casting slip can be coloured with VBS colour concentrate during mixing.
Leave the concrete castings to dry in the mould for approx. 12 hours. Carefully remove from the mould and allow to dry for a further 12 hours.
The Keraflott castings can be removed from the mould after approx. 3 hours, but should then also be left to dry for approx. 12 hours.
After the castings have dried, you can use a drill to carefully drill holes into the castings, which will later function as memo holders. Then put some craft glue in the hole and insert the memo holder.
Use the paper pad and the punches to make little notes. These can be written on with markers as desired.
Leave the concrete castings to dry in the mould for approx. 12 hours. Carefully remove from the mould and allow to dry for a further 12 hours.
The Keraflott castings can be removed from the mould after approx. 3 hours, but should then also be left to dry for approx. 12 hours.
After the castings have dried, you can use a drill to carefully drill holes into the castings, which will later function as memo holders. Then put some craft glue in the hole and insert the memo holder.
Use the paper pad and the punches to make little notes. These can be written on with markers as desired.
The castings can be used beautifully as decorations or as practical memo holders.
