Create jewellery from resin
Anleitung No. 2115Discover the great possibility of making jewellery out of resin. You can create great pendants with the resin. For example, how about a pendant with a beautiful flower enclosed in it? Or you can create pieces of jewellery with fascinating colour gradients.
Mix the resin according to the instructions. It is best to blow dry the resin a little with the embossing dryer while it is still in the container so that any bubbles that form are reduced. Then pour the resin into the metal frames up to the top. Now blow dry the resin lightly with the embossing dryer. This will again reduce bubbles and give you a smoother surface.
Decorate your jewellery as desired with glitter, colour and flowers. The glitter is sprinkled on the wet resin, the colour is mixed into the resin with a skewer (looks similar to marbled) and the flowers can be easily arranged on the resin. For complete colouring from the resin, it is mixed in separate containers and then placed in the metal frame.
After a drying time of approx. 24 hours, remove the tape and if necessary sand the edges clean with a polishing attachment e.g. Proxxon or very fine sandpaper. If the reverse side should be milky matt, you can mix resin and apply it to the reverse side with a brush and let it dry again for 24 hours. You can also brush the surface again with clear resin.
Finally, mount the pendants on the chains.
Mix the casting compound according to the instructions and fill it into the casting moulds.
It is best to blow dry the resin a little with the embossing dryer while it is still in the container so that the bubbles are reduced.
Then add a little of the desired colour to the casting resin. Stir in lightly with a skewer. From a distance, very lightly smooth the surface with the embossing dryer.
For the jewellery pieces, place the ear studs and chain pins in the mould after a short drying time (approx. 30 min to 1 hr).
For the resin chain pendants, a hole can also be drilled in it after demoulding (Proxxon) and the chain pin inserted. This way the bead cap can also be put on.
After at least 24 hours, unmould the jewellery parts and put them on the cotton cord and spiral neck hoops.