Macramée Jute Design Bottles
Anleitung No. 1467Simple glass bottles are given a fascinating look by wrapped cords with Macramé-knots. Read here how it works exactly.
Macramé-create glass bottles
This decoration was made with 3,5 mm thick Jute yarn created. In the first step, cut 6 strips of equal length for the Macramé-work (1.40 m each)
Start at the neck of the bottle!
Wrap some Jute ribbon loosely around the bottle neck and close the wrapped loop by placing a first Macramé knot around the Ribbon (see illustration).Pull the loop off the bottle and place 5 more evenly distributed knots on the loop (6 pieces in total). Glue the bottle neck with transparent double-sided adhesive Ribbon,. Put the jute loop around the bottle neck again and tighten the Ribbon of the loop. Wrap the Jute ribbon up to the edge of the bottle neck on the adhesive surface.
Grid knotting
Two threads are always knotted together in an offset manner, resulting in a decorative grid of jute threadsTo hide the knots cleanly
The lower 1.5 cm of the bottle (starting atfrom bottle bottom) are also wrapped with double-sided Adhesive tape . On these the lowest knots can be pressed on comfortably. Cut the threads just behind the knots. The ends of the threads are hidden under another Ribbon wrapped on Adhesive tape .Ready to decorate
Simply pull up natural colored or brown wooden beads on Ribbon and wrap them around the bottle. Small feather-Embellishment or similar accessories simply stick on with hot glue, fill the bottle with Decorative sand and decorate with grass or artificial plants.