www.vbs-hobby.com 
Exclusive offersStehsammler-Kombi mit Decoupage
Instructions No. 655 Instructions No. 655 Difficulty: Advanced
With this great handicraft idea four stable standing collectors are mounted on a wooden plate with wheels. They offer a lot of space for sheet music, magazines or even exercise books. The large outer surfaces are designed in 3D-optics with decoupage motifs and MDF-decors on the theme "music".
Here's how it works
Prime the standing collectors with a Paint sponge beige primer. Then wipe a little grey-brown Handicraft paint with the dry Paint sponge over it and apply some Beige again. Wipe over the edges with the dark brown Ink Pads and emphasize in this way, wipe some stamping ink lightly over the surfaces with a kitchen towel
Cut out the Paper motifs and stick them onto the standing collectors with decoupage glue
Important: Paint the motifs well from the inside to the outside so that no air bubbles remain underneath.
After drying, seal all surfaces with several layers of Decoupage varnish until the transition from Paper to the wood can no longer be felt
Prime thealuminium sheet white, after drying cut out different motifs from the Straw silk paper-sheet roughly and glue them with decoupage glue. As soon as the glue has dried, cut out the motifs and trace the contours with the edge of the metal spinning tool, then emboss them plastically from behind on the special mat with the ball and glue them on with silicone glue.
Shorten the glued wood panel on the longer side by about 5 cm with a jigsaw and paint it grey-brown, accentuate the edges with stamping ink.
Place four furniture rolls under the corners of the board and finally fix the standing collectors on the board.
Prime the standing collectors with a Paint sponge beige primer. Then wipe a little grey-brown Handicraft paint with the dry Paint sponge over it and apply some Beige again. Wipe over the edges with the dark brown Ink Pads and emphasize in this way, wipe some stamping ink lightly over the surfaces with a kitchen towel
Cut out the Paper motifs and stick them onto the standing collectors with decoupage glue
Important: Paint the motifs well from the inside to the outside so that no air bubbles remain underneath.
After drying, seal all surfaces with several layers of Decoupage varnish until the transition from Paper to the wood can no longer be felt
Prime thealuminium sheet white, after drying cut out different motifs from the Straw silk paper-sheet roughly and glue them with decoupage glue. As soon as the glue has dried, cut out the motifs and trace the contours with the edge of the metal spinning tool, then emboss them plastically from behind on the special mat with the ball and glue them on with silicone glue.
Shorten the glued wood panel on the longer side by about 5 cm with a jigsaw and paint it grey-brown, accentuate the edges with stamping ink.
Place four furniture rolls under the corners of the board and finally fix the standing collectors on the board.
This idea is timelessly beautiful!
Some Article are unfortunately no longer available
But this idea is too good to withhold from you. We would be happy to continue to present it to you - let yourself be inspired!
