Anleitung: Weihnachtliches Tischset
Instructions No. 1372Cut the Cotton fabric, to the plucks and the Chalkboard fabric according to the following material specifications. Take into account a seam allowance of 4 cm for the red Cotton fabric .
Material requirements table set:
38 x 50 cm plain red Cotton fabric
ca. 42 x 30 cm plucking fabric
approx. 23 x 10 cm Chalkboard fabric
Material requirements napkin tape
Approx. 28 x 12 cm monochrome red Cotton fabric
Approx. 28 x 10 cm Plucking fabric
Approx. 28 x 7 cm Chalkboard fabric
First place the red Cotton fabric in front of you with the right side down and iron the seam allowance inwards
Now iron the plucked and the panel cuttings onto the adhesive fleece. The heat of the iron causes the fleece to bond to the two textiles (please follow the instructions for the adhesive fleece) and gives the placemat stability
Now position the pluck and Chalkboard fabric exactly on the place mat (if necessary, staple it on with Pins ) and fix both fabrics by ironing them on, also using the adhesive fleece.
Finally, decorate the edges of the placemat with decorative ribbons. These can either be ironed on with adhesive fleece as before or sewn with the sewing machine.
Napkins - and cutlery ribbon
As with the place mat, Cotton fabric, pluck and Chalkboard fabric are joined together with adhesive fleece. The cut-out pieces can be embellished in advance: cut the edge of the red cotton fabric with the pinking scissors. For a pretty fringed edge, loosen some of the threads of the plucking with a needle. Then simply place the Fabric cuts on top of each other and iron them together using the adhesive fleece
The Ribbon is closed with a Satin ribbon . This is pulled through two holes. In order to be able to pierce them in the correct place, first place a Napkin and a cutlery for testing in the created decorative ribbon and mark the places which have to be pierced for the Ribbon . Pierce the napkin ribbon with the punching pliers and pull through the "closure-Satin ribbon".
Glass rosette "Star
Cut the star of the glass rosette with the serrated scissors. Then connect red Cotton fabric and Chalkboard fabric with adhesive fleece, cut the opening for the wine glass with the punch pliers in the middle of the star and cut the star from hole in one place.
Finally, according to your own taste, all three pieces are decorated with small wooden stars or other Christmas accessories, and personal messages are applied to the board surfaces with chalk.